FRUK+19 – 6 and 10KVA

The Rack Mount UPS is a transformerless On-line Double Conversion technology solution. With IGBT’s and high speed diodes, it guarantees low input THD and PF higher than 0.9. Ideal for data centers and protection in IT, medical, commercial and industrial sectors. Maintenance bypass rotary switch included.

Category:
  • Versatile, versatile and lightweight transformerless two-phase UPS
  • 100% self-recoverable after total battery discharge
  • High availability due to maintenance bypass included
  • Standard maintenance bypass on all models
  • Cabinet for Rack Mount configuration with separate drum cabinet
  • Increased operating efficiency and reduced weight and size
  • SNMP card and optional alarm relay
  • Versatility to operate due to its configurable voltage and output angle
  • Simplicity of components
  • RS 232 port

FRUK+19 – 6 and 10KVA data sheet

Related products

  • UPS7400WX-T3U 225, 300, 330, 500, 600, 660, 750, 900, 1000kVA 480V

    The UPS7400WX-T3U UPS series uses an expandable architecture to deliver units of any size from 225 to 1000 kVA using 330 kVA modules, making it an ideal choice for data centers and other commercial applications.

  • KR+19-HV 6 and 10 KVA

    The PA KR+19 HV UPS offers output power factor of 1.0, efficiency up to 98.5%. Flexible configuration for critical applications. Suitable for protecting medical equipment, telecommunications, control and important devices with voltages of 208, 220, 230 and 240 VAC.

  • KR+19 1, 2 and 3 KVA

    UPS PA KR+19, tower mounted. Continuous and reliable protection. Capacities of 1, 2 and 3 KVA. Recharge voltage of 27.4, 54.7 and 82.1 VDC. Recharging time of 4 hours. Compact dimensions and light weight. Backup time of 5 minutes.

  • PDM POWER DISTRIBUTION MODULES from 20 to 300 KVA

    Implementation with significant savings by minimizing wiring and installation time. Custom-built, capacities from 20 to 300 KVA, option of isolation transformer and power monitor. Money saving and surge protection.

  • DSPK-HV 45 TO 90 KVA

    The PA DSPK-HV UPS is a three-phase, DSP-controlled, transformerless, Double Conversion technology. With IGBT’s in Rectifier and Inverter, it offers high performance and efficiency for critical applications. Suitable for loads in the IT, medical, commercial, industrial and telecommunications sectors.

This site is registered on wpml.org as a development site.